公告

Gentoo交流群:87709706 欢迎您的加入

#1 2024-02-16 13:34:56

batsom
管理团队
注册时间: 2022-08-03
帖子: 594
个人网站

Linux/x86 6.6.13 内核配置选--Library routines

[ ] Automatically choose fastest RAID6 PQ functions
翻译:自动选择最快的RAID6 PQ功能
说明:

- - Generic bitfield packing and unpacking
翻译:通用位字段打包和拆包
说明:

{ } CORDIC algorithm
翻译:CORDIC算法
说明:

< > Simple prime number generator for testing
翻译:用于测试的简单素数生成器
说明:

    Crypto library routines  --->
翻译:加密库例程
说明:

      - - ChaCha library interface
翻译:ChaCha库接口
说明:

      - - Curve25519 scalar multiplication library
翻译:Curve25519标量乘法库
说明:

      - - Poly1305 library interface
翻译:Poly1305库接口
说明:

      - - ChaCha20-Poly1305 AEAD support (8-byte nonce library version)
翻译:ChaCha20-Poly1305 AEAD支持
说明:

- - CRC-CCITT functions
翻译:
说明:为内核树外的模块提供CRC-CCITT循环验证算法支持

{ } CRC16 functions
翻译:
说明:为内核树外的模块提供CRC16循环验证算法支持

{ } CRC calculation for the T10 Data Integrity Field
翻译:
说明:为内核树外的模块提供CRC循环验证算法支持.从而允许内核树外的SCSI模块利用T10/SCSI Data Integrity Field保障端到端的数据完整性

{ } CRC calculation for the Rocksoft model CRC64
翻译:
说明:Rocksoft CRC64模型的CRC计算

{ } CRC ITU-T V.41 functions
翻译:
说明:为内核树外的模块提供CRC ITU-T V.41循环验证算法支持

- - CRC32/CRC32c functions
翻译:
说明:CRC32/CRC32c功能

< >   CRC32 perform self test on init
翻译:
说明:在CRC32算法初始化的时候进行一个简单的自我测试.不确定的选"N"

      CRC32 implementation (Slice by 8 bytes)  --->
翻译:CRC32实现(8字节切片)
说明:选择CRC32算法的实现方式.不确定的请保持默认值"Slice by 8 bytes",除非你知道自己在做什么

{ } CRC64 functions
翻译:CRC64功能
说明:

< > CRC4 functions
翻译:CRC4功能
说明:

{ } CRC7 functions
翻译:CRC7功能
说明:

{ } CRC32c (Castagnoli, et al) Cyclic Redundancy-Check
翻译:CRC32c循环冗余校验
说明:

{ } CRC8 function
翻译:为内核树外的模块提供CRC8循环验证算法支持
说明:

[ ] PRNG perform self test on init
翻译:PRNG在init上执行自检
说明:

- - XZ decompression support
翻译:
说明:为内核树外的模块提供XZ解压支持.详见"Documentation/xz.txt"文档.子项是针对不同平台的"BCJ filter decoder".按需选择即可

[ ]   MicroLZMA decoder
翻译:
说明:MicroLZMA解码器

< > XZ decompressor tester
翻译:
说明:XZ解压测试程序.不确定的选"N"

[ ] Dynamic allocation of DMA bounce buffers
翻译:DMA缓冲区的动态分配
说明:

[ ] DMA Contiguous Memory Allocator
翻译:DMA连续内存分配器
说明:

[ ]   Enable separate DMA Contiguous Memory Area for NUMA Node
翻译:为NUMA节点启用单独的DMA连续内存区域
说明:

          Default contiguous memory area size:
翻译:
说明:默认连续内存区域大小

(0)   Size in Mega Bytes
翻译:大小
说明:

      Selected region size (Use mega bytes value only)  --->
翻译:所选区域大小
说明:

(8)   Maximum PAGE_SIZE order of alignment for contiguous buffers
翻译:连续缓冲区的最大PAGE_SIZE对齐顺序
说明:

[ ] Enable debugging of DMA-API usage
翻译:启用DMA-API使用的调试
说明:

[ ] Enable benchmarking of streaming DMA mapping
翻译:启用流DMA映射的基准测试
说明:

< > glob self-test on init
翻译:init上的glob自检
说明:

- - IRQ polling library
翻译:IRQ轮询库
说明:

[ ] Select compiled-in fonts
翻译:选择已编译的字体
说明:

[ ]   VGA 8x8 font
翻译:
说明:

- -   VGA 8x16 font
翻译:
说明:

[ ]   Mac console 6x11 font (not supported by all drivers)
翻译:Mac控制台6x11字体
说明:

[ ]   console 7x14 font (not supported by all drivers)
翻译:
说明:

[ ]   Pearl (old m68k) console 8x8 font
翻译:
说明:

[ ]   Acorn console 8x8 font
翻译:橡子控制台
说明:

[ ]   Mini 4x6 font
翻译:
说明:

[ ]   Medium-size 6x10 font
翻译:
说明:

[ ]   console 10x18 font (not supported by all drivers)
翻译:
说明:

[ ] Sparc console 8x16 font
翻译:
说明:

[ ] Sparc console 12x22 font (not supported by all drivers)
翻译:
说明:

[ ] Terminus 16x32 font (not supported by all drivers)
翻译:
说明:

[ ] OLED 6x8 font
翻译:
说明:

离线

页脚

Powered by FluxBB

本站由XREA提供空间支持